VORTEX WORLD...Geobiology and its distant origins in time....Universal power law for the energy spectrum of breaking Riemann waves...Electromechanical Energy Conversion With Dynamics Of Machines

"If you wish to find the secrets of the Universe, think in terms of energy, frequency and vibration. »

Nicholas Tesla

In this picture in Rosheim we see on the pillar a pattern with designing the magnetic waves and a vortex formed by the faces, probably it is necessary to put oneself in a circle around this column at the crossroads of fields of gold, nickel, mercury and silver. With a snapping sound the machine broke loose from the six quarter inch bolts that connected it to the ground, and then, with a soft wining sound, it took off with a blue glowing fog emerging from the machine . Dowsing is not a gift reserved for an elite. Everyone has the innate ability to do so. This ability is amplified when the individual is listening to his body and environment. This feeling can be practiced, worked on and refined by everyone. Ask and you will receive! Moreover, the perception of radiation by the body is a phenomenon that everyone has already experienced. We have all felt physically comfortable or uncomfortable entering certain places before. Any visible or invisible form emits form waves that have a positive or negative impact on our body. The world and the elements that make it up exist only through the interactions of these present waves. A good geobiologist will know how to interpret these shape waves and vibrations to define and harmonize them in a given place. Two forms of radiesthesia are available to the geobiologist. The first is resonance radiesthesia, which is based on the response of tools to the radiation of the geobiological phenomena sought, such as a metal network, a fault, an underground watercourse, a vortex, etc. These radiesthesia tools can be a Lecher antenna, a pendulum, an antenna lobe, metal rods, etc. The second method is mental radiesthesia: following the formulation of a clear and precise question, the energetic bodies dilate in a perceptible way by a physical feeling specific to each geobiologist. These two methods of dowsing can also be accompanied by biometric tables or figures to qualify and quantify the phenomenon observed.

Imagine that we could control that force ....
The radiesthesists of the Middle Ages and Antiquity were the precursors of modern geobiologists with their knowledge and feelings of the time. These dowsers and scientists used sticks, rods, clocks and other divinatory tools to demonstrate and amplify their feelings, in order to determine the presence of visible or invisible phenomena. They did this by observing the reactions of their instruments to the radiation emitted by the bodies they were looking for. The radiesthesist could look for the presence of groundwater (dowser), minerals or any other material. Many engravings describe the use of the divining rod, such as Major Re Metallica (1556) by Georgius Agricola, grandfather founder of mineralogy and metallurgy. Today, the contemporary geobiologist will of course have highly sophisticated and expensive devices such as the high and low frequency electromagnetic wave detector, in order to measure and determine the source of electromagnetic disturbances that affect electro-sensitive or non-sensitive occupants.

The universal power law for the spectrum of one-dimensional breaking Riemann waves is justified for the simple wave equation. The spectrum of spatial amplitudes at the breaking time $t = t_b$ has an asymptotic decay of $k^{-4/3}$, with corresponding energy spectrum decaying as $k^{-8/3}$. This spectrum is formed by the singularity of the form $(x-x_b)^{1/3}$ in the wave shape at the breaking time. This result remains valid for arbitrary nonlinear wave speed. In addition, we demonstrate numerically that the universal power law is observed for long time in the range of small wave numbers if small dissipation or dispersion is accounted in the viscous Burgers or Korteweg-de Vries equations.
Sengupta's lower bound for the Yang-Mills action on smooth connections on a bundle over a Riemann surface generalizes to the space of connections whose action is finite. In this larger space the inequality can always be saturated. The Yang-Mills critical sets correspond to critical sets of the energy action on a space of paths. This may shed light on Atiyah and Bott's conjecture concerning Morse theory for the space of connections modulo gauge transformations.Among Viktor Schaubergers machines there is no one like the Repulsin or the flying saucer that has created such myths and stories. The basic designs are from the mid thirties when he tried to finish the Climator. Often mysterious material acting as catalysts are used in the devices. Different light and sound phenomena are also reported from people that claim that they had been eye witnesses to these flying devices. A most peculiar thing is that they seem to be very difficult to control, as they have a habit of smashing into the ceiling, and after that, being irreparable. Viktor himself claimed that powerful diamagnetic forces were responsible for the enormous effect. However, in the literature and in Viktor's own notebooks there is no evidence, if and if so how these devices worked. The question is, are all these rumours true ? Do these devices really work ?

Well, what we can see from the few pictures that exist is that there seems to be some kind of turbine, shaped as a double flat membrane with concentric rills on it. If you compare to the wave pattern you get when you throw a stone into a small pond you will comprehend better what I mean. However, the wave pattern on the upper membrane had a small difference in the phase compared to the lower membrane. On the edge rim, turbine vanes are mounted, probably acting as a source of power for both self rotation and even for the generation of power. The double membrane was probably co-rotating as four bolts that fix them together, can be observed. As modern quantum physics shows us with the experiment of the double groove, the trajectory of photonic particles reacts to the observer's gaze and intention. It is therefore demonstrable that the condition of your geobiologist allows him to resonate or not with the forces present on the site and to define them well, or even to influence and harmonize them if necessary. There was a time when invisible electrons were only a theory, then came the advent of CERN's electron microscopes and particle accelerator, which validated the 1964 theory of the Higgs Boson (God's particle) in 2012. From that moment on, everything became possible according to science! As this event taught us, even today, human intuition and feelings often exceed the capabilities of the most advanced machines. Several geobiological discoveries also apply here.

In the pictures we can also see that there is some kind of body, a bowl shaped plate that is bend over the membrane whose outlet can be found inside the rim foil. Together, the rim foil (the metal band around the lower rim) and the outlet form a Venturi "tube". An air intake can be seen on the top of the device. Unfortunately, one important component is missing on the top. This component should "pre-form" the air so it starts to twist before it enters the double membrane. This component had a similar shape as a sea shell. Viktor said that this device was never built as it is very difficult to produce a thing with such a complex geometry. In the book Living Water (by Olof Alexandersson) a colloid solution of very fine grained quartz crystal and water is mentioned as a catalyst for the process.

So, if we start to think for a while. Let's say that this device really worked, it really did take off! How would it work ?
Consider what probably happens in the machine:

- The air is sucked through the intake where it is pre-formed into a vortice containing vortices within vortices shaped as long threads rotating around their axis.In my opinion the double membrane was not co-rotating. If they where not counter rotating, one of the was fixed, probably the upper membrane and the lower rotating on the driving axis. A description on what happens is given on the wind mill page.

- Briefly the air threads start to spin faster and faster around their axis driven by the difference in speed between the membranes. As the air reaches longer out on the membrane, the peripherical speed increases along with the radius and so does the angular speed of the air threads.

- During the passage between the double membrane the air has to pass cavities where the volume sometimes is bigger and sometimes is smaller due to the difference in phase between the upper and the lower membrane. When the air passes a narrow cavity it gets extra energy input and when it passes a larger cavity it is allowed to expand.

- The "air threads" are twisted along their axis in a smaller and smaller radius leading to an increase of the angular speed. As the air reaches further out, closer to the rim, the threads start to bend due to the increasing peripherical speed. When the air passes the different cavities it starts to pulsate in a rhythm that is depending on the angular speed of the disc. Huge forces are generated when all these degrees of freedom are harmonised into a symphony.

However, it is not necessary to use unknown theories as the diamagnetic forces to explain how the powerful lift is generated. Of course this can be the explanation, the future will show us if this is the case. As for the colloid solution of fine grained quartz and water, one can imagine that huge amounts of piezo electricity is produced between the membranes, where the pulsating and twisting air containing small amounts of the solution is passing. At a certain rotation speed we have reached the level where we have "harmony" and the air is "self pulsating" and generating electricity that "pumps" up the energy level. What actually happens in this process in certainly unknown! But, high levels of static electricity have been reported in similar devices connected to the ZPE-area. ZPE stands for zero point energy or vacuum energy which is the idea of an unknown field of energy existing in vacuum. Read more about this phenomena! In several proposals of propulsion devices, for flying saucers high electric energy levels are also used. As an example we have David Hamels flying disk. You can read about it here. It could be that the diamagnetism that Viktor Schauberger mentioned, is the same phenomena or physical principle that is proposed in these propulsion devices. In Viktor's lessons he always talked about two important things:
"You shall always remember two things. First, remember how the rivers are meandering. Second, remember the electrophorus (or Kelvin's thunderstorm ) experiments!"

As I mentioned before there is one (at least…) more explanation on why Viktor Schaubergers machine took off with such power. It might be explained by "normal" aerodynamics and a phenomena named ‘the Coanda effect'. Very brief the Coanda effect is the phenomena when a flowing media tends to "stick" to a curved surface, You can read a biography of Henri Coanda here . If we take a closer look on the bowl shaped plate, we realise that it is a circular wing. When the air is rushing out inside the foil or the metal band that can be seen on the lower rim of the device it creates a sub pressure just over the foil.

The surrounding air is sucked inside the foil and with the air from the membranes. This generates a sub pressure over the device and the device is "hanging" in it. You could say that it is an inverted hovercraft. But instead of creating a pressure under the craft You create a sub pressure over it. Basically it is the same, it is only a matter of pressure differences. The sub pressure is modest but as we have a large area we also get a huge lifting force. There is one more way to create the sub pressure over the craft. You can let the air blow out on the top instead.

When the twisted air follows the Coanda surface it sweeps down the surrounding air and we get the sub pressure this way. If You want to read more about the Coanda effect follow this link . On this page You can read a lot about different applications and a very interesting new type of fan, the Jet Fan.
The principle of the "flats and angles" (type 1) is demonstrated in picture 1, where I have built a small (250 mm diameter, 80 mm high) prototype of the Jet Fan type (type1). I have also "rebuilt" my vacuum cleaner so it is blowing instead (my wife demanded a new one … ). The air blows out through a special nozzle so it forms a "disk" of blowing air.

Picture 2: When the nozzle with the "air disk" is placed close to the top, we can simulate what is happening on type 1. As You can see in the picture, the silk threads follow the air flow shoving the path.

Picture 3: Oh Yes, It works !
The Malmögroup will continue their work during 1998 with further testing of these ideas. We proposed a model of the membrane turbine and will continue to shape the moulds so we can multiply the membranes. A section of the body will also be designed as a test rig where it will be possible to test different profiles of the body and different types of nozzles and other things related to the device. We will also present the results on this page, please continue to check the site. I will write in the "what's new section" when there is more info.

www.vortex-world.org/repulsin.htm

Taken on: January 3, 2024

Tags:

stone

granit

church

underworld

inner world

Nicolas Tesla

Electromechanical

Energy

Machine

Universal

Power

Riemann

Waves

Machines

Dynamic

Rosheim

Alsace

Powerful

Crossing

Vortex

World

Merger

Turbine

Membrane

Co-rotating

Molsheim

Bugatti

Tesla

Geobiology « less

Sets appears in: • 'Someday perhaps the inner light will shine forth from us and then we'll need no other light.'

Stats: 9,474 views

go back

Link to this photo view:
Link to this photo large view: